MVR Evaporation plant delivers substantial operational cost saving in areas with an ample supply of low-cost electrical energy.
Once an MVR evaporation plant is running, little or no additional steam is required. In MVR evaporation plant, a centrifugal fan is used to recompress the vapour to a higher pressure, resulting in a rise in temperature. This means that the recompressed vapour can be used as the evaporation plant heating medium, while the condensate is idea for preheating of the feed product.
For low boiling point increases, single stage compressor can be used to fulfil requireents of designing.
For high boiling point increases, we will provide two designing:multiple-stage compressors , single stage compressor combining with multiple-effect .
MVR evaporation plant almost don't use steam, but electric energy is required for mian energy source.
Power consumption of main motor of MVR are due to heat exchange area and evaporating temperature of evaporation plant:
Heat exchange area is bigger and in result power consumption is lower, but investment of equipment is therefore increased;
Evaporating temperature is higher and in reuslt power consumption is lower, but fouling in the calandria is therefore increased;
Evaporating temperature is lower and in result power consumption is higher.
MVR be powerd by an electric motor, the rotaty speed of an MVR can be controlled by an frequency converter, the rotary speed of an MVR may control evaporation rate and final concentation of MVR evaporation plant .
Particular feature:
Low specific energy consumption
Gentle evaporation of the product due to low temperature differences,largely increase product quality, decrease fouling.
Short residence times of the product , as a single-effect system is most often used.
Only a small area condenser, requirement of little cooling water.
High availability of the plants due to the simplicity of the process
Excellent partial load behaviour
Low specific operating costs
Fields of application:
Particularly suited for the food and beverages industry (evaporation of milk ,whey , sugar solutions), chemical industry (evaporation of aqueous solutions), the salt works industry (evaporation of saline solutions), and environmental Protection technology
(concentration of waste water).
MVR evaporation plant comparing with normal multiple-effect evaporation plant:
| Type |
Multiple-effect evaporation plant / TVR evaporation plant |
MVR evaporation plant |
| Energy sources |
Steam |
Electric power |
Energy consumption of
concentrating water of 1 ton,per hour |
0.16 - 0.6 T |
18 - 26 Kw |
Evaporation rate: 50T/h, Unit price of steam: 160 RMB/T, Unit price of electric power:0.8 RMB/Kw. 8000 hours, per annum.
| Type |
4-effect evaporation plant |
MVR evaporation plant |
| Energy consumption |
Steam: 11T/h |
Electric power:1000Kw/h |
| Expense of energy consumption,per annum,RMB |
14,080,000 RMB |
6,400,000 RMB |
| Economizing expense,per annum,RMB |
Zero |
7,680,000 RMB |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}